Module Description

The Blackfin-based DSP Module is a general computing platform designed to run µCLinux as operating system. The module is very compact (50 x 90mm) and operates from a single 3.3V power supply. The module is equipped with an FPGA to provide digital interfacing and co-processing to the main processor.

Blackfin is a registered trademark of Analog Devices.

 Specifications

• Processor: ADSP BF533 500MHz max internal clock speed, Max Bus speed 133MHz
• SDRAM: 32 MByte
• Flash: 4 MByte
• FPGA: Altera EP1C6 (EP1C12 on request) with appropriate serial boot device
• UART: 2 x 16550 compatible UARTs
• Ethernet: SMSC Lan91C111i 10/100Mb/s
• USB
• Onboard voltage supervisor and temperature sensor
• Size: 90mm x 50mm
• Size: Total mounted height: 9mm
• Power supply: 3.3V (all other voltages required are generated on-board)
• Current Consumption "Off" mode: < 400µA Maximum: 2A (all peripherals including FPGA running at full speed) Nominal: < 400 - 500mA
• Temperature rating: All components on the board are Industrial Temperature Rated
• All interfaces are accessible through the high-density connector, which allows the user to place the external connectors and buffering as required on the carrier card.

 How to buy

If you would like to order a Blackfin-based DSP Module/Development Kit, please contact us at: info@xstreamflow.com